HF Transceiver RS 150 T
Ideal
choice for use in mobile vehicles of all kinds
• Compatible with XK 2000,HF850 and R150 A
• High mechanical and weatherresistance
• Simple and easy-to-operate via external control unit
• One hundred presets each containing a complete list of parameters and classes of emission
• Configurable from fill-gun or PC
• Transceiver, control unit and antenna tuner software upgradeable from PC
• Speech compressor, syllabic squelch
• Integrated ALIS or ALE system
• Optional HF modem with data transfer rate up to 5400 bps
• Single coaxial cable link between transceiver and antenna tuner
• Continuous monitoring of transceiver parameters and functions
• High reliability
HF Transceiver RS150T
Brief description
RS150T will satisfy your HF communication needs meeting the most demanding environmental conditions. Its small size, robust design and easy-to-use characteristics make it the ideal choice for use in vehicles of all kinds, including armoured vehicles with mortars. RS150 T is based on XK2000 technology and makes use of its sophisticated DSP and ALE means.
The transceiver features excellent highfrequency characteristics and intelligent internal control (continuous monitoring of functions on module level), can be easily operated from a detached control unit with an easy -to- read backlit display
RS150T in its basic configuration is capable of transmitting morse, speech and teletype data. All common classes of emission such as SSB (USB, LSB), ISB, AME, CW, FSK, AFSK, weather fax and FM are available. The transceiver covers 1.5 MHz to 30 MHz for TX, 10 kHz to 30 MHz for RX, with 401 freely programmable channels. The unit meets MIL-STD-810 for environment, MIL-STD-461 and EN50081/ 50082 for EMC. State-of-the-art technologies have been used in RS150T, such as digital signal processing in the intermediate-frequency section of the transceiver and the automatic connection unit.
The transceiver comes equipped with ALIS (adaptive automatic link setup) or ALE (automatic link establishment) system (MIL-STD-188-141A).
Typical applications are shortwave telephone and fax, transmission of picture and computer data with 5400 bits/s, data services such as DATA LINK Y, LINK E, LINK 11/LINK 22 and MAHRS expandability.
Communication processors to international standards, fast and reliable data transmission as well as message handling (eg with MERLIN) allow XK2000 to be integrated into modern multimedia systems, thus providing the basis for reliable, worldwide communication independent of existing infrastructures.
ALE Processor GS2200 automatically sets up the optimum radiocommunication link using the adaptive Rohde & Schwarz ALIS 2000 procedure or FED-STD-1045/1046/1049 (MIL-STD-188-141A). As for ALIS, this procedure is 100% compatible with the HF850 family of radio equipment.
Data transmission: Up to 5400 bits/s are possible by means of the internal
multimode HF Modem GM2100.
Selectable waveforms are to Rohde & Schwarz
standard, MIL-STD-188- 110A and STANAG 4285/4481.
This enables the transmission
and reception of telefax messages, computer data, and colour video still pictures,
for example. Connection between the data terminal (fax machine, video camera)
and XK2000 is made by System Processor MERLIN from Rohde & Schwarz or an
equivalent PC with the appropriate software.
HF e-mail
Rohde & Schwarz multimedia product line PostMan now provides the user with seamless online communication, based on wireless TCP/IP protocol, with an open system approach, offering errorfree, fast and reliable LAN/WAN connections via HF.
HF Transceiver RS150T with shockmount for military vehicles. Frequency range 1.5 MHz to 30 MHz, RF output power up to 150 W, 401 programmable user channels; available operating modes: USB, LSB, ISB, AM and CW,optional modules for ALE, EPM as well as fast data.
AD150T
Antenna Tuning Unit, 250 programmable user channels, silent tuning in less than 30 ms, at a tuning power of 30 W, shockproof and immersible down to 4 m.
DO150TG
Control Unit DO150TG with graphics LCD and menuguided user interface. Direct entry of frequencies and channel parameters via hardkeys and softkeys. Direct access to all main settings via menus also in the manual mode. Storage of up to 400 presets, built-in loudspeaker; if desired, settings are confirmed by voice prompt. Default settings (user profile) can be optionally stored. Connectors for fillgun, handset/headset, PC interface for data transmission and software update.
RS150T
Compact Control Unit DO150T - selection of channel and operating modes by rotary switches, mode indication , alphanumeric display of channel number and frequency , storage of up to 100 presets, PC interface for data transmission and software update.
Specifications
|
Frequency |
|
General data |
|
|
Transmission |
1.5 MHz to 30 MHz |
Operating temperature range |
–25 °C to +55 °C |
|
Reception |
10 kHz to 30 MHz |
Storage temperature range |
–40 °C to +85 °C |
|
Frequency setting |
decadic in 1-Hz steps |
Supply voltage |
+21 V to +31 V DC |
|
Frequency error |
<1 x 10–9/°C |
Maximum altitude |
3000 m above sea level,Tamb = 35 °C |
|
|
<1 x 10–9/day |
Humidity |
to MIL-STD-810E, Meth. 507.3, 26 °C/41 °C, 95% RH, 5 days |
|
Aging |
<1 x 10–7/year |
Mechanical test |
|
|
Channel memory |
|
(with shockmount OS150T1) |
|
|
User-programmable channels |
401 |
Vibration |
6 g / 5 Hz to 500 Hz |
|
Half-duplex channels thereof |
100 |
Shock |
3000 g / 0.2 to 0.5 ms |
|
Fixed-programmed channels (ITU) |
401 to 2240 |
EMC |
MIL-STD-461 |
|
Additional channels for ALE |
120 |
MTBF |
>9600 h |
|
Transmit power |
150 W PEP into 50 Ω, 3 power levels |
Dimensions (W x H x D) |
435 mm x 130 mm x 291 mm |
|
Classes of emission |
– A1A (CW) |
Weight |
15 kg |
|
|
– J3E (USB, LSB) |
Remote Control Unit D0150T |
|
|
|
– H3E (AME/USB) |
Channel memory |
10 |
|
|
– J7B (A7J, J3E for data transmission) |
Selection |
rotary switch (rotation >360°) |
|
|
– B8E (ISB) |
Indication |
2 characters on LCD |
|
|
– F1B (FSK, AFSK, baud rate 50 to 600 Bd, shift 42.5 kHz to 425 kHz) |
Transmit indication |
LED, green |
|
|
– F3E (FM) |
|
|
|
|
– F1C (FAX) |
Fault indication |
LED, red + error message on LCD(13 characters max.) |
|
Switchover times |
|
Operational information |
on LCD (13 characters wide) |
|
Tx/Rx, Rx/Tx |
<10 ms |
Operation temperature range |
–25°C to +55°C |
|
Frequency change |
<30 ms |
Storage temperature range |
–40°C to +85°C |
|
|
|
Mechanical test |
|
|
Transmission |
|
Vibration |
6 g / 5 Hz to 500 Hz |
|
Output power into 50 W/VSWR <1.5 |
150 W +0.5/–1 dB PEP |
Shock |
3000 g / 0.2 ms to 0.5 ms |
|
|
100 W +0.5/–1 dB CW(power reduction according to VSWR,no switchoff for VSWR∞) |
EMC |
MIL-STD-461 |
|
Power levels |
10/30/100 W |
Dimensions (W x H x D) |
175 mm x 67 mm x 52 mm |
|
Spurious suppression |
>70 dB, typ. 80 dB (into 50 W) |
Weight |
0.5 kg |
|
Harmonics suppression |
>45 dB, typ. >60 dB (into 50 W) |
Antenna Tuning Unit AD150T |
|
|
Intermodulation products |
>32 dB, typ. >36 dB (referred to PEP) |
Frequency range |
1.5 MHz to 30 MHz |
|
S/N ratio |
>150 dB (referred to 1 Hz test bandwidth,△f >1 MHz) |
Input power |
150 W PEP, 100 W CW + 0.5 dB |
|
Weighted S/N ratio (H3E) |
>50 dB (referred to PEP), weighted to CCIT (0.41/P53) |
Input impedance |
50 Ω |
|
Carrier suppression |
>60 dB, typ. >70 dB (refered to PEP) |
VSWR |
<1.5 (typ. 1.3) |
|
Suppression of unwanted sideband |
>60 dB (referred to PEP) |
Matchable antennas (1.5 MHz to 30 MHz) |
5 to 7 m whip antenna |
|
Voice compression |
built -in |
|
7 to 12 m rod antenna |
|
|
|
|
≥3 m whip antenna (1.5 MHz to 2 MHz) |
|
Reception |
|
|
duty cycle 1:1 |
|
Input impedance |
50Ω, VSWR <3 |
|
long-wire and broadband antennas |
|
Noise figure |
|
Tuning time |
|
|
without preamplifier |
17 dB |
Initial tuning |
typ. 1 s, max. 6 s |
|
with preamplifier |
9 dB |
Repeated tuning |
typ. <0.2 s |
|
Input sensitivity (typ.)(for S/N = 10 dB, f = 0.2 MHz to 30 MHz) |
|
Silent tuning |
<30 ms |
|
without preamplifier |
|
Number of memory channels |
approx. 250 |
|
A1A (CW) |
0.4 µV EMF, BW = 300 Hz |
RF tuning power |
30 W ±1 dB (VSWR <3) |
|
J3E (SSB), J7B |
1.0 µV EMF, BW = 2.7 kHz |
Connectors |
|
|
H3E (AME), 1 kHz, m = 60% |
2.7 µV EMF, BW = 6 kHz |
RF inpu |
N connector |
|
with preamplifier |
|
Antenna |
ceramic insulator |
|
A1A (CW) |
0.15 µV EMF, BW = 300 Hz |
Antenna for f <1.5 MHz |
N connector (optional) |
|
J3E (SSB), J7B |
0.4 µV EMF, BW = 2.7 kHz |
Control data |
via inner conductor, 9600 Bd |
|
H3E (AME), 1 kHz, m = 60% |
1.0 µV EMF, BW = 6 kHz |
Power supply |
via inner conductor of RS150T (21 V to 31 V, approx. 1 A) |
|
Receiving bandwidhts |
3 dB 60 dB |
Permissible distances |
|
|
|
±75 Hz ±150 Hz |
Antenna feedpoint – ATU |
<0.3 m |
|
|
±150 Hz ±225 Hz |
ATU – transceiver |
<50 m (coaxial cable) |
|
|
±300 Hz ±430 Hz |
Filling Device PK150T |
|
|
|
±500 Hz ±770 Hz |
Memory |
|
|
|
±750 Hz ±990 Hz |
SRAM |
256 byte (battery buffered,min. 1 year) |
|
|
±1050 Hz ±1600 Hz |
EEPROM |
8192 byte |
|
|
±1200 Hz ±1760 Hz |
SRAM erase |
pushbutton |
|
|
±1350 Hz ±1900 Hz |
Battery condition indicator |
LED, yellow |
|
|
±1550 Hz ±2100 Hz |
Filling |
via RS-232-C (I2C format) |
|
|
±3000 Hz ±4200 Hz |
Temperature ranges |
|
|
|
±4000 Hz ±5200 Hz |
Operation |
–25°C to +55°C |
|
AGC |
<3 dB (1 mV to 1 V EMF) |
Storage |
–40°C to +85°C |
|
Response to a 60 dB step variation |
|
Dimensions (diameter x length) |
39.5 mm x 132 mm |
|
Attack time |
<10 ms |
Weight |
0.2 kg |
|
Decay time |
25/150/500 ms/1 s/3 s |
Interface |
D0150T (connector type Amphenol |
|
AF distortion |
|
|
162GB-36T12-10-PN for direct connecting to D0150T) |
|
Line output 0 dBm |
<1% |
Handset with Control MB150T |
|
|
Loudspeaker |
<10% at rated power |
Channel control |
pushbutton up/down |
|
Weighted S/N ratio (H3E) |
>46 dB SINAD for 1 mV |
Channel indication |
00 to 99 on LCD |
|
|
EMF,weighted with filter to CCIT (0.41/P53) |
Squelch control |
pushbutton SQ |
|
Nonlinearities (1.5 MHz to 30 MHz) |
|
ALE control |
pushbutton CALL & SCAN |
|
Blocking |
3 dB signal attenuation (Df = 30 kHz,useful signal 2 mV EMF, interfering signal 5 V EMF) |
LCD Light |
pushbutton LITE (duration 10 s ±3 s) |
|
Desensitization |
>20 dB SINAD (Df >30 kHz, BW =2.7 kHz, useful signal 30 µV, interfering signal 100 mV) |
Power supply |
typ. +12 V DC |
|
Intercept point IP3 |
>30 dB (Df >30 kHz, interfering signal 2 x 0 dBm) |
Speaker Impedance |
25 Ω ±20% |
|
Crossmodulation |
<10% (Df >30 kHz, useful signal 1 mV EMF, interfering signal 4 V EMF, 1 kHz, m = 30%) |
Sensitivity at 80 mW |
>72 dB |
|
Inherent spurious signal Immunity to interference (Df >30 kHz) |
<–113 dBm, with few exceptions |
Volume change (push button) |
6 dB ±2 dB |
|
Image-frequency rejection |
>80 dB, typ. >90 dB |
Output power |
0.5 W max. |
|
IF rejection |
>80 dB, typ. >90 dB |
Microphone output voltage |
|
|
Oscillator reradiation |
<10 µV (at antenna input) |
(1 kHz,acoustic pressure 80 dB at mic.,distance from tone source 20 mm) |
>100 mV |
|
Protection of receiver input |
<100 V EMF (f <30 MHz) |
Operating temperature range |
–25°C to +55°C |
|
|
|
Storage temperature range |
–40°C to +85°C |
|
|
|
Dimensions (W x H x D) |
58 mm x 210 mm x 91 mm |
|
|
|
Cable length (quiescent state) |
645 mm |
|
|
|
Weight |
0.45 kg |